Clifford Concept 600UK How To Use Manual page 8

Press button 1 on the master remote control or button
TO DIS ARM:
the companion remote. One chirp and one indicator light flash
confirms disarming. In addition, the doors will automatically unlock,
the LED will turn off and the interior lights will turn on and stay on
for 30 seconds or until you start the engine, whichever occurs first.
By pressing button 3 on the master remote or pressing both the
TO ARM OR
DIS ARM SI LENTLY:
arm or disarm your Concept 600 with all the indications previously
noted except the chirps.
For three seconds, continually press button 1 on the master remote
TO AC TI VATE
or button
THE PANIC
FEA TURE: will flash repeatedly and the siren will blare until you press the
button again to turn it off. If the ignition is on (indicating you are
in the car), the doors will lock to prevent an assailant from
entering (note: some vehicles are unable to lock the doors whilst
the ignition is on). If the ignition is off, the doors will unlock,
allowing you to enter immediately without fumbling with your keys.
If you have the remote boot release option, pressing button 2 on
TO RE MOTELY
the master remote or button
OPEN THE BOOT:
whilst the system is disarmed will release the boot latch (see Smart
boot release option on page 18 for more information). If you do not
have the boot release option, you may assign this button to activate
one of the other functions noted in column 4 of the Ta ble of
User- Selectable Fea tures on page 22, or it can be programmed into a
Clifford ACG 2 electric garage door/entry gate opener interface or
a Concept 100, 300, 400 or 600 system on your other vehicle.
Button 4 on the master remote or button
TO RE MOTELY
remote is factory-set to activate the IntelliStart 4* remote engine
START THE EN GINE:
starting accessory. If you do not have this option, you may assign
this button to activate one of the other functions noted in column
4 of the Ta ble of User- Selectable Fea tures on page 22, or it can be
programmed into a Clifford ACG 2 electric garage door/entry gate
opener interface or a Concept 100, 300, 400 or 600 system on
your other vehicle.
If you have this option, channel 7 (LevelShift button once, then
TO AC TI VATE THE
button 3) on the master remote or button
TIMED HEAD LIGHTS:
remote will turn on the headlights for any duration you wish
between one second and 4 minutes (the factory setting is 10
seconds; see User-selectable features on pages 21-22). If you do not
have this option, you may assign this button to activate one of the
other functions noted in column 4 of the Ta ble of User- Selectable
Fea tures on page 22, or it can be programmed into a Clifford ACG 2
electric garage door/entry gate opener interface or a Concept 100,
300, 400 or 600 system on your other vehicle.
REV C UPDATE PAGE: ONLY PAGES 8, 9, 10, 19 and
the back cover change, all other pages same as REV B.
button and the button on the companion remote, you can
on the companion remote. The indicator lights
* This fea ture/ac ces sory is not evalu ated by Thatcham.
8
on
on the companion remote
on the companion
on the companion