Table of Contents
Advertisement
QUICK REF ER ENCE: RE MOTE CON TROL FUNC TIONS
Func tion
Arm or dis arm and lock or un lock the doors
Optional wired ac ces sory #1 (usu ally re mote boot re lease)*
Silently arm or dis arm and lock or un lock the doors
Unassigned or IntelliStart 4** ac ces sory en gine start/stop*
Unassigned*
Unassigned or SmartWin dows 4 ac ces sory full open or vent*
Optional wired ac ces sory #2 (usu ally head light ac ti va tion)*
Optional wired ac ces sory #3
(usually IntelliVoice 4 ac ces sory speech on/off)*
Remote valet mode entry/exit (see page 14)
Remote Prox im ity Sen sor zone over ride (see page 15)
Unassigned or IntelliStart 4** LowBattery/LowTemp AutoStart as well as
standard transmission SafeStart (see IntelliStart 4 manual)
Unassigned*
Unassigned*
Unassigned*
* These but tons can be as signed to con trol Con cept 100, 300, 400 or 600 sys tems and ac ces so ries on your other ve hi cles.
ACG 2™ (Anti- CodeGrabbing 2™)
ACG 2 protects you and your automobile from the most effective and onerous car
stealing device ever used by car thieves — a code-grabber.
Code-grabbers literally record, from hundreds of feet away, the code sent by your car
alarm remote control (code-grabbers are very similar to, but simpler than, cellphone
"cloning" devices). The thief then simply plays back the code when you're gone, instantly
disarming the alarm and unlocking the doors. It's like leaving your keys and remote on
the bonnet.
Many alarms can be defeated that easily, and some of the latest "smart" code-grabbers
can even decipher the code hopping/jumping sequence used by other car alarm
manufacturers. In contrast, Clifford Concept 100, 300, 400 or 600 systems use complex
digital signal processing and unbreachable code encryption to randomly change the
digital code every time you use the remote control. Your remote controls will never
transmit the same code twice, and the control unit will never accept the same remote
control code twice. Thus the code recorded and played back by the thief's code-grabber
— even the latest generation smart code-grabbers — will never be accepted by your
Concept 600 system.
REV C UPDATE PAGE: ONLY PAGES 8, 9, 10, 19 and
the back cover change, all other pages same as REV B.
Companion
** This fea ture/ac ces sory is not evalu ated by Thatcham.
10
Master Remote
Remote
LevelShift? Button
Button(s)
no
1
no
2
no
3
+
no
4
1 time
1
+
1 time
2
+
1 time
3
1 time
4
+
2 times
1
+
2 times
2
+
2 times
3
2 times
4
3 times
1
3 times
2
Advertisement
Table of Contents
