Two- Point In Ter Nal Autoim Mo Bi Li Sa Tion; Wire Less Fu El Guard Mod Ule; En Gine Re Start Fea Ture - Clifford Concept 600UK How To Use Manual

Two- Point In ter nal AutoIm mo bi li sa tion

Whilst armed, your Concept 600 assures that your vehicle is completely immobilised by
automatically locking out both the ignition system and starter motor. The system's dual
internal immobilisation circuits ensure that a thief will not be able to start your vehicle's
engine even if he had a duplicate of your car key. What's more, even if he were to find
the system control unit and tear it out of your vehicle, he still would be unable to start
your car's engine!
Please be aware that, unlike AutoArming described on page 13, AutoImmobilisation
occurs 30 seconds after you turn off the ignition regardless of whether you open or close
any doors. What's more, disabling the AutoArming feature has no effect on
AutoImmobilisation.
When you remotely disarm your Concept 600 system, the AutoImmobilisation circuits
will automatically disengage. You then have 30 seconds in which to start the engine (or
turn the ignition switch to its "ON" position).
If more than 30 seconds pass, the immobiliser will automatically reactivate. This will be
visually indicated by the LED repeatedly flashing, but at a slower rate than that of the
normal rapid "armed" indication flash rate.
To dis arm the Auto Im mo bi liser if it has armed itself, use the re mote con trol to
arm and then disarm the system, or turn on the ignition and press button 1 on
the master remote control or button

Wire less Fu el Guard Mod ule™

Our ingenious Wireless FuelGuard Module makes your vehicle undrivable by
interrupting the fuel delivery system whilst the system is armed, and it can't be defeated
even by the most sophisticated thief.
Why not? Because this unique Clifford innovation unfailingly provides reliable fuel pump
obstruction without any wires connecting it to the system control unit. That means that
a thief would not be able to find the Wireless FuelGuard Module even if he tried locating
and tracing the system wires, since there are no wires for him to trace!
Operation is completely automatic and user-transparent.
Make sure to keep the rec ord that your Clif ford in staller pro vides as to the
Wireless FuelGuard Module lo ca tion in case your ve hi cle needs fu ture
serv ic ing.
Thirty seconds after shutting down the engine, both the AutoImmobilisation electronics
and the Wireless FuelGuard Module will engage, preventing engine starting. To restart
the engine, simply do the following:
1. Turn your ignition switch to the "ON" position.
2. Press button 1 (master remote control) or button
This will disengage the immobilisation.
3. You may now start the engine.
on the companion remote control.

En gine Re start Fea ture

12
(companion remote control).