Table of Contents
Advertisement
Chapter: Connectors
3.18 Audio
Audio input and output functions can be accessed via a 2x5 pin connector (JST B10B-PHDSSLFSN,
mating connector: PHDR-10VS). There are two ways to use this connector. Default functionality is the
familiar audio in, audio out, and microphone. OS dependent device drivers can switch these signals to
support a 5.1 output; thus in this mode no audio input signals are available.
Signals "SPDIFI" and "SPDIFO" provide digital input and output. If a transformation to a coaxial or optical
connector is necessary this must be performed externally.
Pinout audio 2x5 pin connector:
Description
digital output SPDIF
digital input SPDIF
sound output right /
front output right
AUX input right /
rear output right
microphone input 1 /
center output
page 40
Name
Pin
SPDIFO
1
SPDIFI
2
LOUT_R /
3
FRONT_R
AUXA_R /
4
REAR_R
MIC1 /
5
CENTER
Name
6
3.3V
7
S_AGND
8
LOUT_L /
FRONT_L
9
AUXA_L /
REAR_L
10
MIC2 /
LFE
Beckhoff New Automation Technology CB2051
Description
3.3 volt supply
analog ground sound
sound output left /
front output left
AUX input left /
rear output left
microphone input 2 /
LFE output
Audio
Advertisement
Table of Contents
