Before Using Your Appliance - DCS RGTC-305 Use And Care Manual

BEFORE USING YOUR APPLIANCE

TO INSERT THE OVEN RACKS IN OVEN:
1. Hold the rack with the back safety stop in the up position and towards the rear of the oven. Slip it into the oven
so the rack rails engage and ride on the rack rollers.
2. As you slide the rack into the oven, tip the rack up slightly (see Fig. 02), so that the safety stops on the back of
the rack slide over the rollers in the oven. The safety stops keep the rack from sliding out of the oven when
pulled forward.
TO REMOVE OR REPOSITION THE RACKS:
1. Pull the rack forward.
2. Lift the front of the rack up so the safety stops clear the rack/rollers.
3. Pull the rack forward.
9
15º - 20º 15º
Fig. 02