Table of Contents
Advertisement
DEA System provides the following instructions which are valid for a typical system but obviously not complete for every system. For each automatism the installer
must carefully evaluate the real conditions existing at the site. The installation requisites in terms of both performance and safety must be based upon such
considerations, which will also form the basis for the risk analysis and the detailed design of the automatism.
Pos.
Descrizione - Description - Description - Beschreibung - Descripción - Descrição - Opis - Описание
1
CPilly 60 column
2
REV
3
Photocells -
4
Safety edge -
5
Flashing light
Anti lock-picking key switch
6
7
Remote-control
8
Radio keypad -
3x1,5 mm²
A
4 x 0,5 mm²
Make the 230V ± 10% 50 Hz mains connection using an omnipolar switch or any other device that guaran-tees the omnipolar disconnection of the
mains network with a contact opening distance of 3 mm
All metal parts must be grounded
Example of typical installation
6 x 0,5 mm²
B
I-1
Hide quick links:
Advertisement
Table of Contents
