Safety Instruction Decals - Xylem G&L A-C 8100 Series Instruction Manual

1 Introduction and Safety
Hazard level
NOTICE:
Special symbols
Some hazard categories have specific symbols, as shown in the following table.
Electrical hazard

1.2.2 Safety instruction decals

WARNING:
Do NOT exceed the maximum working pressure of the pump. This information is listed on
the nameplate of the pump.
Alert symbol
Decals
Make sure your pump has these safety instruction decals and that they are located as this
figure shows. If the decals are missing or illegible, contact your local sales and service
representative for a replacement.
4
WARNING:
CAUTION:
Electrical Hazard:
This safety alert symbol is used in manuals and on the safety instruction decals on the pump
to draw attention to safety-related instructions.
When used, the safety alert symbol means that failure to follow the instructions may result in
a safety hazard.
G&L Pumps Series A-C 8100 Base Mounted Centrifugal Pump INSTRUCTION MANUAL
Indication
A hazardous situation which, if not avoided, could result
in death or serious injury
A hazardous situation which, if not avoided, could result
in minor or moderate injury
Notices are used when there is a risk of equipment
damage or decreased performance, but not personal
injury.
Magnetic fields hazard
CAUTION: