Save & Exit Setup; Exit Without Saving - Shuttle FB81 Manual

3. Then system will request you to confirm new password by asking
4. Once the confirmation is completed, new code takes effect.
No Password Setting :
5. If you want to delete password, just press <Enter> key instead of
If You Forget Password :
6. While being asked of password, you just forget it and you must
@
Save & Exit Setup
Pressing <Enter> on this item asks for confirmation:
Pressing "Y" stores the selections made in the menus of CMOS - a
special section of memory that stays on after you turn your system off.
The next time you boot your computer, the BIOS configures your
system according to the Setup selections stored in CMOS. After saving
the values the system is restarted again.
@

Exit Without Saving

Pressing <Enter> on this item asks for confirmation:
This allows you to exit from Setup without storing in CMOS any
change. The previous selections remain in effect. This exits from the
Setup utility and restarts your computer.
you to key in new password again.
new password while password input is requested. And the other
procedures are the same as above password setting.
access the system. The only way is to turn off system and clear
CMOS memory. Please take reference in page 28
CMOS setting.
Save to CMOS and EXIT (Y/N)? Y
Quit without saving (Y/N)? Y
- 76 -
for clear
A3