Shuttle FB81 Manual page 63

********** VGA Setting **********
PEG/Onchip VGA Control
If you select "Onchip VGA", the signal will only output from Onchip
VGA Port. If you want to use external PEG Card, please change display
mode from Onchip VGA to PEG Port in this item.
Ø The choice: Disabled, Auto, Onchip VGA or PEG Port .
PEG Force X1
This item allows you to enable or disable On-Chip PEG.
Ø The Choice: Enabled or Disabled.
On-Chip Video Memory size
You can "Press Enter" to onboard Video memory size.
On-Chip Frame Buffer Size
This item allows you to set the onboard VGA share memory size.
Ø The Choice: 1MB, 4MB, 8MB, 16MB or 32MB.
FIXED Memory Size
This item allows you to set the FIXED Memory Size.
Ø The Choice: 0 MB, 56 MB, 63 MB, 120 MB or 127 MB.
DVMT Memory Size
This item allows you to set the DVMT Memory Size.
Ø The Choice: 0 MB, 56 MB, 63 MB, 120MB, 127 MB or
MAX.DVMT.
- 58 -