Shuttle FB81 Manual page 14

- USB 1.1/2.0 Complaint Interface Onboard
Ø 4 UHCI USB 1.1 Host controller and 1 EHCI USB 2.0 Host controller
support up to 8 USB ports. All 8 USB ports can be assigned to USB 2.0
interface with BIOS option
- I/O Interface
Provides a variety of I/O interfaces:
Ø 1 x DB9 Serial port.
Ø 1 x DB15 VGA connector.
Ø 1 x Clear CMOS button.
Ø 1 x 1394 port.
Ø 1 x PS/2 Mouse port.
Ø 1 x PS/2 Keyboard port.
Ø 1 x Giga LAN port.
Ø 2 x USB 1.1/2.0 ports.
Ø 1 x SPDIF-Out Coaxial port.
Ø 1 x SPDIF-Out Optical port.
Ø 1 x SPDIF-In Optical port.
Ø 1 x 7.1 Channel Rear-Out port.
Ø 1 x 7.1 Channel Bass/Center port.
Ø 1 x 7.1 Channel Front-Out port.
Ø 1 x 7.1 Channel Surround-Back port.
Ø 1 x Line-In port.
- PCI Bus Master IDE Controller Onboard
One Ultra DMA 100/66/33 Bus Master Dual-channel IDE ports provide sup-
port to a maximum of two IDE devices (one Master and one Slave per channel).
The IDE Bus implements data transfer speeds of up to 100/66/33 MB/sec and
also supports Enhanced PIO Modes. 80-pin Cable Backward Compatible Legacy
ATAPI Devices, ATAPI IDE CD-ROM, CD-R, CD-RW, and LS-120 supports.
- Advanced Configuration and Power Interface
Features four power saving modes: S1 (Snoop), S3 (Suspend to RAM), S4 (Sus-
pend to DISK), and S5 (Soft-Off). ACPI provides more efficient Energy Saving
Features controlled by your operating system that supports OS Direct Power
Management (OSPM) functionality.
- 9 -