Shuttle FB81 Manual page 67

SATA Hot-Plug
This item can be enabled. When SATA mode item be set in "RAID" or
"AHCI" mode.
Ø The Choice: Disabled or Enabled.
Note: You must to install Intel Application Accelerator (IAA) in O.S. to
make sure this function work properly.
Onboard Device
Option are in its sub-menu.
Press<Enter>to enter the sub-menu of detailed options.
USB Controller
Select Enabled if your system contains a Universal Serial Bus (USB) port
on this mainboard.
Ø The choice: Enabled or Disabled.
USB 2.0 Controller
This entry is for disable/enable EHCI controller only.This BIOS itself may/
may not have high speed USB support. If the BIOS has high speed USB
support built in, the support will be automatically turn on when high speed
device were attached.
Ø The choice: Enabled or Disabled.
High Definition Audio
This item is used to defined High Definition Audio.
Ø The Choice: Auto or Disabled.
Onboard LAN Boot ROM
Decide whether to invoke the boot ROM of the onboard LAN chip.
Ø The choice: Enabled or Disabled.
SuperIO Device
Option are in its sub-menu.
Press<Enter>to enter the sub-menu of detailed options.
Onboard FDC Controller
This item specifices onboard floppy disk drive controller. This setting
- 62 -