Shuttle FB81 Manual page 71

hold the power button down for 4 seconds to cause a software power
down.
Ø The choice: Instant-Off or Delay 4 Sec.
Wake-Up by PCI card
This item Enabled/Disabled PCI Power Management Event to wake up
system.
Ø The choice: Enabled or Disabled.
Power On by Ring
This item determine the system will resume by activating of modem ring.
Ø The choice: Enabled or Disabled.
USB KB/MS Wake-up From S3
If you are using a USB KB/MS, and the ACPI suspend type is set to S3, or
S1&S3 you can enable this item to allow a KB/MS to wake up the system
from power saving mode.
Ø The choice: Enabled or Disabled.
Resume by Alarm
When this item enabled, your can set the date (day of the month) and
time to turn on your system.
Ø The choice: Disabled or Enabled.
Date (of Month) Alarm
This item selects the alarm Date (day of the month).
Ø Key in a DEC number: Min=0, Max=31.
Time (hh : mm : ss) Alarm
This item selects the alarm Time.
[hh] Ø Key in a DEC number: Min=0, Max=23.
[mm/ss] Ø Key in a DEC number: Min=0, Max=59.
*** Reload Global Timer Events ***
Global Timer (power management) events are I/O events whose occur-
rence can prevent the system from entering a power saving mode or
can awaken the system from such as a mode. In effect, the system
remains alert for anything that occurs to a device that is configured as
Enabled, even when the system is in a power-down mode.
Primary IDE 0/1
When these items are enabled, the system will restart the power-saving
- 66 -