Table of Contents
Advertisement
7 . When the 1900 MHz LCD screen is selected, the pass bandwidth is
indicated at the bottom center of the LCD screen and the Uplink (UL)
center frequency is at the top of the screen (refer to Figure 4) . The
corresponding Downlink (DL) frequency automatically adjusts and is
always 80 MHz higher than the UL frequency shown . For common
settings please see Table 2 on page 15 .
Figure 4
SMART
TECHNOLOGY
800
MHz
CH
Select
8 . Pressing the 1900 MHz "CH Select" button toggles between 5 and 15
MHz pass bandwidth and increases the UL center frequency in 2 .5
MHz increments .
9 . The UL and DL gains are displayed on the LCD screen similar to
Figures 3 and 4 . UL gain is shown on the left, and DL gain is shown on
the right .
10 . If a red light or "OVERLOAD" is displayed on LCD screen, turn the
800 or 1900 MHz knob as shown in Figure 5 .
Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660
or email: tech@wilsonelectronics.com.
Min
800
MHz
Max
UL Center Frequency
™
1857.5
UL CH DL
70 A 72
70 5 72
UL Gain
Bandwidth
Figure 5
Min
800
800
MHz
MHz
Max
Min
1900
MHz
Max
Dual-Band
Channelized
Signal Booster
DL Gain
Min
Max
Mon.- Fri. Hours: 7 am to 6 pm MST.
1900
MHz
CH
Select
1900
MHz
12
Advertisement
Table of Contents
