Unpacking And Installing; Spare Parts; Preventive Maintenance - Agilent Technologies Varian 320-MS Pre-Installation Instructions

Quadrupole mass spectrometer lc/ms
Hide thumbs Also See for Varian 320-MS:
Table of Contents

Advertisement

Varian will not accept liability for damage if obviously received damaged materials were
received without noting the damage on the receiving documents.

Unpacking and Installing

The Varian Representative will review the Pre-installation Checklist with the customer to ensure
that the site requirements were met. The Varian Representative will unpack and install the
instrument and demonstrate the fundamental operation and maintenance procedures. The User
Representative must be present during the installation.
The Varian Representative will demonstrate that the system meets the performance
specifications, which are on the data sheet and any additional criteria explicitly written into the
sales contract.
Plan to analyze samples only after the installation is complete and the conditions of delivery
accepted. The process requires at least three days.

Spare Parts

Please refer to the Quadrupole Hardware Manual, which has list of spare parts for routine
operation.

Preventive Maintenance

The customer is responsible for performing routine and preventive maintenance of the LC,
autosampler, MS, and data system. If using a nitrogen generator, perform the preventive
maintenance to ensure that the nitrogen supply is clean and dry. Any instrument problems
resulting from a contaminated gas supply are billable and not included in the Varian Warranty.
Perform regular preventive maintenance to increase the life of the system, to maximize system
uptime, and to optimize system performance. Please refer to the Quadrupole Hardware Manual
for details. The Varian Representative will describe and demonstrate these procedures during
the installation.
Trademark Acknowledgment
Microsoft® and Windows® are registered trademarks of Microsoft Corporation. PEEK™ is a
registered trademark of the Victrex PLC Company, Lancashire, England. Other brand and
product names are trademarks or registered trademarks of their respective holders.
9300025700: Rev. A
Check the checklist box: Shipping cartons inspected for damage. If there was
any damage, the conditions were reported.
14 of 14
Pre-installation Instructions

Advertisement

Table of Contents
loading

Table of Contents