Table of Contents
Advertisement
Problem
White residue is visible
on the dishware. Cloud-
ing occurs on glass-
ware and cutlery; the
deposit can be wiped
off.
There are rust stains on
the cutlery.
Frequently asked questions
Possible cause and solution
The rinse aid dosage is too low.
Increase the dosage (see "Settings menu – Rinse
aid").
The salt reservoir is empty.
Fill the salt reservoir (see "Before using for the first
time – Dishwasher salt").
The salt reservoir cap has not been screwed on cor-
rectly.
Replace it, making sure that it screws back on cor-
rectly.
The water softener is programmed to too low a water
hardness level.
Program the water softener to a higher water hard-
ness level (see "Settings menu – Water hardness").
A program was not run after dishwasher salt was
added. Traces of salt have got into the wash cycle.
Always run the
ing salt.
The affected items are not corrosion resistant.
Purchase cutlery which is dishwasher-proof.
Rinse & Hold
program after refill-
77
Advertisement
Table of Contents
