Miele Marine PG 8131i Operating Instructions Manual page 11

Commercial
Hide thumbs Also See for Marine PG 8131i:
Table of Contents

Advertisement

Do not use an extension cord to connect this machine to electric-
ity. Extension cords do not guarantee the required safety of the ma-
chine (e.g., danger of overheating).
Do not open the casing of the dishwasher. Any contact with live
connections or tampering with the electrical or mechanical compo-
nents of the dishwasher will endanger your safety and may lead to
machine malfunctions.
The dishwasher must not be used if the wire is damaged. A dam-
aged wire may only be replaced by a suitable wire of the same type.
For safety reasons, such replacement may only be carried out by
Miele Technical Service or a qualified service technician.
Before servicing the appliance, disconnect it from the power sup-
ply.
The plastic housing of the water connection contains electrical
components. It must not be dipped in water.
There are live wires in the water intake hose. Do not shorten the
water intake hose, even if it is too long.
The built-in Waterproof system offers reliable protection against
water damage if the following conditions are met:
– Installation has been carried out correctly.
– The dishwasher is properly maintained and parts are replaced in
case of noticeable damage.
– The faucets have been turned off during longer absences (for ex-
ample, vacation).
The Waterproof system will work even when the dishwasher is
switched off. However, the dishwasher must remain connected to
the electricity supply.
Important safety instructions
11

Advertisement

Table of Contents
loading

Table of Contents