Table of Contents
Advertisement
End of program
The program has finished when the
message
End
appears in the display.
The drying fan may continue to run for
a few minutes at the end of the pro-
gram.
The dishwasher can now be emptied.
Switching off
At the end of a program:
The dishwasher can be switched off
at any time using the button.
Switching the dishwasher off during a
program stops the program.
Turning the dishwasher off during the
run-up to a delay start time (FlexiTimer)
will also stop the process.
If the dishwasher is not going to be
used for a longer period of time, e.g.,
during vacations, the water supply
should be turned off.
Unloading the dishwasher
Dishes tend to break and chip more
easily when they are hot. Allow the
dishes to cool until they are comfortable
enough to handle before unloading
them.
The dishes will cool much faster if you
open the door when the program has
ended.
First unload the lower basket, then the
upper basket.
This will prevent water drops from the
upper basket from falling onto the
dishes in the lower basket.
Interrupting and changing a
program
Risk of damage due to water
leakage.
The door of the commercial dish-
washer must not be opened during
operation.
Once the program has started, leave
the door closed to ensure that no
water drips out.
Operation
43
Advertisement
Table of Contents
