D-Link DP-G310 User Manual page 53

2. Choose AppleTalk Protocol... from the Configuration
menu.
3. If your AppleTalk network is divided into AppleTalk zones,
you will have to specify which zone the print server should
be in. You should locate the print server in the same zone as
most of the users who will be using it.
If your network is not divided into zones, the AppleTalk Zone
field should contain a single asterisk "
4. For each printer port that will be used for AppleTalk printing,
you may need to change the AppleTalk port settings. Press
the appropriate Port Setting button to open the AppleTalk
Port Configuration dialog window.
PS Admin will display the port's Chooser Name (which is the
same as the port name) and allow you to change the port's
settings:
Printer Type
PostScript printers should use the LaserWriter type.
PostScript Level Describes whether the printer supports
Level 1 PostScript or Level 2 PostScript.
information can usually be found in the printer's
documentation or on the printer test page.
Setting up AppleTalk Printing
Print Server Administration User's Guide
".
*
Describes the type of printer. Most
This
47