Installing Ps Admin; Starting Ps Admin - D-Link DP-G310 User Manual

Installing PS Admin

Follow the procedure outlined below to install PS Admin:
1. Insert the Print Server installation CD
2. Click Install PS Admin Program
3. The Setup program will begin by copying some files and ask
for your confirmation. Click the Next > button to continue.
4. The Setup program will then ask you to select a directory on
your hard disk where you want it to install the PS Admin
program. If you want a destination directory path other than
the one shown, click the Browse... button to select it.
Click the Next > button to continue the installation.
5. The setup program will copy PS Admin program files to the
directory you selected, as well as create a PS Admin
program group. Press the Finish button to complete the
installation.
Once the installation is complete, you can begin using PS Admin.

Starting PS Admin

If you are using Windows 95/98/Me or Windows NT 4.0 (or a later
version of Windows), to start the PS Admin program:
1. Press the Start button in the taskbar.
2. Within the Programs menu, select PS Admin.
Installing and Starting the PS Admin Program
Print Server Administration User's Guide
9