Testing Your Print Server - D-Link DP-G310 User Manual

6. Choose Save Configuration from the Configuration menu,
or press the Save Configuration button on the toolbar. This
will store the new settings into the print server and restart it.

Testing Your Print Server

Once you have set all of the necessary parameters, and have
finished connecting your printer(s) to the print server, you should
test each of the printer ports using the Print Test function.
For each port you wish to test,
1. Select the print server in the PS Admin main window's
server name display (or extended server display).
2. Choose Print Test... in the Tools menu. PS Admin will
prompt you for which port you wish to test.
3. Choose a port and click OK. The print server should print
out a "Print Server Test Page."
4. Repeat this procedure for each printer port with an attached
printer.
NOTE: The Print Test function may not work with PostScript printers
that do not accept plain text files.
Getting Started Setting up Your Print Server
Print Server Administration User's Guide
29