Resetting The Print Server - D-Link DP-G310 User Manual

Print Server Administration User's Guide
Port Number
==============================================================
[Total Status]
Jobs
Sizes (KBytes)
Timeouts
--------------------------------------------------------------
[Current Job]
Printer Status
Index
Protocol
Name
Spooling Bytes
Printing Bytes
==============================================================
1 - Refresh Port Status
0 - Return to Display Information Menu
Enter Selection:

Resetting the Print Server

Sometimes it may be desirable to restart the print server, in order
to reset its internal statistics counters or to clear other status
information.
The
telnet
An ordinary reset has the same effect as powering off the
print server and powering it back on again.
counters will be cleared, but all of the print server's
configuration settings will be retained.
A factory reset not only restarts the print server, but changes
all of its configuration settings back to their original values,
as the print server was shipped from the factory.
92
1 2
45 1
23179 0
0 0
On Line Off Line
0 1
NETWARE
00C60001
0 172032
0 153600
interface provides two different types of reset:
Appendix: Telnet Interface Administration
3
0
0
0
On Line
0
0
0
Statistics