D-Link DP-G310 User Manual page 27

Print server administration program
Hide thumbs Also See for DP-G310:
Table of Contents

Advertisement

Print Server Administration User's Guide
HEX input format:
To setup 64 bit WEP key, input 10 HEX code, for example,
'3132333435', this is the same with ASCII input '12345'.
To setup 128 bit WEP key, input 26 HEX code, for example,
'31323334353637383930313233', this is the same with ASCII
input '1234567890123'.
On Confirm WEP Key field, input the same string input on the
Encryption Code field.
Make sure the Encryption Code is the same with the access point's
encryption code that the print server is to be connected under
Infrastructure mode. Your PC/Notebook's encryption code also
needs to be setup the same with the print server's encryption code
under either Infrastructure mode or Ad-hoc mode.
Note:
Carefully input Encryption Code, any error setting will cause
communication link to fail. If failure occurs, please reset to
factory-reset for the print server and follow the setup procedure
(Ad-hoc or Infrastructure mode) again.
21
PRINT SERVER WIRELESS SETTING IN PS ADMIN PROGRAM

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ps admin

Table of Contents