Getting Started Setting Upy; Choosing A Name For Your Print Server - D-Link DP-G310 User Manual

Print Server Administration User's Guide
Getting Started Setting up Your Print Server
Before you can print over the network using your print server, you
may need to perform some basic setup tasks. These include:

Choosing a name for your print server.

Setting a password to protect your print server's settings
from unauthorized modifications.
Choosing names for the print server's individual printer
ports, and changing the port settings.
Testing the operation of the print server and checking that
the print server is connected properly.
Once you have finished with these tasks, you can proceed to set up
network printing for Novell NetWare, Microsoft Networks,
AppleTalk networks, and U
about setting up printing on these network types is covered in the
following chapters.
Choosing a Name for Your Print Server
Each network print server has a server name. When the print
server is shipped from the factory, it has a default name of the
form
PS-xxxxxx
the Ethernet address found on the print server's underside sticker.
You can choose any name you like for your print servers, provided
that:
22
TCP/IP systems.
NIX
, where represents the last six digits of
xxxxxx
Getting Started Setting up Your Print Server
Information