Page 2
• Enable/Disable each feature for a single or all DPH-128MS IP Phones selected. Note: For VPN Topologies, D-Link recommends that the DPH-128MS Utility be executed from a computer that is physically located in the same LAN as the DPH-128MS Multiline IP Phone(s).
Page 3
Upload All: Upload the bitmap file to all devices in the list. Note: The DPH-128MS only supports monochrome, uncompressed bitmap files. Its width and height should be limited to 128 by 64 pixels. D-Link DPH-28MS Utility User Manual...
Page 4
The new password you want to set. Confirm: Re-type the new password for confirmation purposes. Refresh: List all DPH-128MS IP Phones in your local network environment. Upgrade: Upgrade the administrator’s name and password for a selected device. Upgrade All: Upgrade the administrator’s name and password for all devices in the list.
Page 5
Note: Be sure to update all requested station positions (1-20) prior to clicking the “Upload” or “Upload to All” button. The DPH-128MS Utility will re-sort your I/R list before the upload to remove empty station positions. After the upload, the previous I/R list of the target phone will be replaced.
Page 6
The current name of the “administrative account” on the device. Password: The current account password of the administrator on the device. Refresh: List all DPH-128MS IP Phones in your local network environment. Upgrade: Update the specified configuration changes to the selected device. Upgrade All: Update the specified configuration changes to all devices in the list.
• Hardware Revision (located on the bottom of the IP Phone (e.g. rev A1)) • Serial Number (s/n number located on the bottom of the IP Phone). You can find software updates and user documentation on the D-Link website as well as frequently asked questions and answers to technical issues.
Page 8
Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. Version 1.0 July 21, 2009 D-Link DPH-28MS Utility User Manual...