D-Link DP-G310 User Manual page 29

The server name is less than 15 characters long.
The server does not have the same name as any Novell
NetWare fileserver on your network.
The server does not have the same name as any of the print
servers configured for your Novell network.
The server does not have the same name as any Microsoft
Networking client or server.
Uppercase and lowercase letters are not distinguished in print
server names.
It is recommended that you limit your print server name to 15
characters, chosen from the letters
hyphen (" ") character. Names that violate this recommendation
-
may not be usable with some networks.
To change your print server's name,
1. Select the print server in the PS Admin main window's
server name display (or extended server display).
2. Choose Server Device... from the Configuration menu, or
press the Configure Server button in the toolbar. (If you
have already assigned a password to the server, you will
have to enter it at this point.) PS Admin will display the
Server Device Configuration window.
3. In the Server Name field, enter the name you have chosen
for the server, and press OK.
4. Choose Save Configuration from the Configuration menu,
or press the Save Configuration button on the toolbar. This
will store the new settings into the print server and restart it.
Getting Started Setting up Your Print Server
Print Server Administration User's Guide
to , the digits to , and the
A Z 0 9
23