Print Server Administration User's Guide
3. Select the PS Admin program.
For Windows 3.1, Windows for Workgroups 3.1x, or Windows NT
3.51,
1. In the Program Manager, double-click on the PS Admin
program group icon to open it.
2. Double-click the PS Admin program icon.
The PS Admin program will then be ready for use.
Instructions for using PS Admin to perform network print server
"initial setup" tasks are found in the next chapter, Getting Started
Setting up Your Print Server. For information about using PS
Admin for other types of print server administration, see the PS
Admin Administration chapter.
10
Installing and Starting the PS Admin Program