D-Link DP-G310 User Manual page 33

Port Name The name by which the port is known on
various network systems. The port name should be at
most 32 characters long and may consist of letters,
numbers, and hyphens. Spaces are not allowed. (If the
port will be used for LAN Manager clients, the port name
can not exceed 8 characters.)
Description A comment describing the port.
Speed Determines whether or not the print server can
send data to the printer at high speed.
printers can accept high-speed data transmission; if your
printer loses characters then you may need to choose the
low-speed mode.
PJL Printer
accepts Hewlett Packard's PJL printer job control
language commands. PJL allows users to get feedback on
the printer's status. If the printer connected to the port
supports PJL, set this field to Yes.
For serial ports, the following dialog will be displayed:
The fields that can be changed are:
Port Name See above.
Getting Started Setting up Your Print Server
Print Server Administration User's Guide
Determines whether or not the printer
Most newer
27