Safety Introduction - ACME LED-635S User Manual

Intelligent scanner. professional lighting technology
Table of Contents

Advertisement

1. Safety Introduction

WARNING
y
Please keep this booklet with the unit for future consultation. If you sell the unit
to another user, be sure that the new user also receives this instruction booklet
thus giving them the necessary information about the use and general warnings
regarding the unit.
y
Before the initial start-up, please unpack and carefully check all components in
case any damage may have occurred during shipping.
y
Locate a suitable spot for your device where there is good ventilation. Also,
make sure that no ventilating fans or slots are blocked.
y
Protect our environment! Please dispose of the packing boxes properly.
y
The electrical work that is necessary for installation must done by qualified
personnel.
y
Always remember to unplug the unit from the main power before any service is
done. Do not open the unit. There are no serviceable parts inside.
y
It is very important to ground the yellow/green conductor to earth in order to
meet regulations for safety.
y
Check the surrounding area and make sure there are no flammable liquids,
water or metal objects that could enter the fixture. If a foreign object enters the
unit, immediately disconnect the main power. Also, place the fixture in a well-
ventilated room at about 15 cm from the walls.
y
Do not touch any wires during operation, as high voltage is hazardous.
y
In the event of serious operating problems, stop using the unit immediately.
Never try to repair the unit yourself. Repairs carried out by unqualified
personnel can lead to damage or malfunction. Please contact the nearest
authorized Technical Assistance Center. Always use genuine spare parts.
Please read the instructions carefully which include important
information about the installation, operation and maintenance.
2-

Advertisement

Table of Contents
loading

This manual is also suitable for:

Led-635b

Table of Contents