EIBENSTOCK BST 152/53 Original Instructions Manual page 20

In order to operate the tool safely, please observe the following notes:
Details of the work area
 Keep the work area free of everything which could obstruct operations.
 Provide for adequate illumination of the work area.
 Adhere to the regulations concerning the power connection.
 Lay the power cable in such a way that any damage by the drill can be
avoided.
 Make sure to always keep the work area in view and to be able to reach all
necessary operating elements and safety installations.
 Keep other persons away from your work area in order to avoid accidents.
Space requirements for operating and maintenance
Whenever possible, keep a free space for operating and maintenance of about
2 m around the drill position, so that you can work safely and have immediate
access in case of a failure.
Inclined drilling
Operations
Drilling
Loosen both Allen screws M10 with
the enclosed wrench SW 8. Loosen
the clamp lever on the bracing (1).
Position the column in the
appropriate angle and tighten both
screws and the clamp lever again.
19