EIBENSTOCK BST 152/53 Original Instructions Manual page 18

Fixing the Core Drill Motor
Wear protective gloves!
Caution! When mounting the machine, risk of squashing.
BST 152/53 – BST 152/60
 Move the machine holder (2) upwards
2
until the locking pin (5) locks in the
column.
5

Remove both Allen screws M8 (3) and
take off the clamp (4).
4
3
 Put the core drill (M) on the carriage and
close the clamp (4) by means of the
Allen screws (3).
17