Advertisement
Available languages
Available languages
Application for Indented Purpose
The diamond drill rig BST 152/53 (60) is made for diamond core drills with a collar
diameter from 53 (60).
The diamond drill rig BST 152S is made for diamond core drills with a special
quick connection fixture (dovetail).
The diamond drill rig BST 152 is made for diamond core drills witch are fixed by
means of a mounting plate.
The max. drilling diameter must not exceed 152 mm.
In case of wrong handling or misuse, the producer does not assume any
liability.
After each readjustment always check that the screws are tightly
fixed so that safe operating of the drill rig is possible.
Mounting the turnstile
Mount the turnstile (1) on
the right or left side of the
carriage (2) depending on
the work to be performed.
Check whether the
turnstile (1) is fixed
tightly.
Use
2
14
Klick
Advertisement
