Related Manuals for EIBENSTOCK B 32
Summary of Contents for EIBENSTOCK B 32
- Page 1 EIBENSTOCK Elektrowerkzeuge Originalbetriebsanleitung………...….3 - 11 Original Instructions……....12 - 19 Magnetbohrständer B 32 Magnetic drill stand B 32...
-
Page 2: Important Safety Instructions
English Important Safety Instructions Warning notices: Warning of general danger Warning of dangerous voltage Machine, drill bit and rig are heavy - danger of being crushed Danger of being ripped or cut In order to protect yourself, implement the following actions: wear ear protectors wear protective goggles wear protective helmet... - Page 3 1 Allen key 2,5 , 5 and 8 mm in a metal case. Application for Indented Purpose Together with the EIBENSTOCK–drills EHB 32/2.2 R, EHB 32/2.2 R R/L and EHB 32/4.2, the drill stand is intended for precision drilling in magnetic materials such as steel.
- Page 4 Safety Instructions Read all safety warnings and instructions provided with the drill stand and the drill. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. ƒ...
- Page 5 Always work concentrated and carefully. Do not use the tool when you are lacking in concentration. Electrical Connection The magnetic drill stand B 32 is made in protection class I. Only use 3- wire extension cable with protective conductor. First, check the correspondence of voltage and frequency and compare it with the data mentioned on the identification plate.
- Page 6 Assembly – Inserting of the drill in the drill rig Remove the auxiliary handle from your drill, if required (see the operating instructions of the drill). Loosen screw 5 using an Allen key. Insert the drill with the drill collar from above into the drill fixture 4 to the stop.
- Page 7 Keep the drill stand clean at all times for good working results and safe working. If the drill stand should fail despite the care taken in manufacturing and testing procedures, repair should be carried out by an authorised after-sales service centre for EIBENSTOCK - power tools.
- Page 8 Damages due to material defects or production faults shall be eliminated free of charge by either repair or replacement. Complaints will be accepted only if the tool is returned in non-dismantled condition to the manufacturer or an authorized Eibenstock service centre.
- Page 9 Declaration of Conformity On sole responsibility we declare that this product is in conformity with the following standards and standard documents: EN 61029-1 according to the regulations 98/37/EC, 73/23 EWG Elektrowerkzeuge GmbH Eibenstock Lothar Lässig 29.04.2011...