Page 1
HORIZON HOWER NCLOSURE NSTALLATION NSTRUCTIONS IMPORTANT DreamLine reserves the right to alter, modify or redesign products at any time without prior notice. For the latest up-to-date technical drawings, manuals or any other details please refer to the support.BathAuthority.com web page.
DreamLine will not replace any damaged products or missing parts free of charge after 3 business days or if the product has been installed. Feel free to contact DreamLine if you have any questions. 2. Please note that you should consult your local building codes with questions on installation compliance standards.
Before discarding the carton, check for small hardware bags that tend to fall to the bottom of the box. If any parts are damaged or missing, please contact DreamLine for replacement.
Page 5
Shower Enclosure Installation 1. Install the Shower base (21) according to Shower base installation instruction. Shower base must installed before wonderboard and finish wall installation. The shower enclosure has to be installed against finished walls. See Fig. 1 for details. 2.
Page 6
3. Mark the drill holes on the wall through the holes in the Wall profile (External) (01). Place the Wall profile (External) aside, drill the holes and insert the Wall anchors (08). Apply silicone caulk along the wall profile and around the holes on the wall.
Page 7
5. Attach top and bottom Pivot bars (05) to the Stationary glasses (03) using Gaskets (16), Washers (19) and Flat head bolts M8×20 (18). Place the Gasket (16) between the Pivot bar and the Stationary glass to prevent glass to metal connection. Place the Washer between the Flat head bolts M8×20 and the Stationary glass.
Page 8
6. Mount top and bottom Pivot assemblies (07) to the Pivot bars (05) using Round head bolts M8×12 (17). See Fig. 7 for details. 7. Remove the back fastener from the Pivot assemblies (07). Set the Glass door (04) into the Pivot assemblies so the holes are aligned and secure the Glass door by assembling the back fastener onto the Pivot assemblies and tighten the provided bolt.
Page 9
8. Install the Handle (06) to the Glass door (04). Start the installation on horizontal Handle on external side of the Glass door, and then install the vertical Handle on internal side of the Glass door. Push the Flanged anti-water strip (13) to the vertical edge of the Glass door to seal between the door and the Stationary glass (03).
9. Apply silicone caulk along connection of the Shower base (21) to the Stationary glasses (03) and the bottom Pivot bar (05). Also apply the silicone caulk along the Wall profiles. See Fig. 11 for details. . 11 Product Maintenance 1.
Any product replaced or repaired during the warranty period will be covered only for the remaining period of the original warranty. In no event will DreamLine be liable for costs of repair or replacement of any installation material, including but not limited to tiles, marble, etc.
Page 12
TEL: 866-731-8378 – 215-957-1411 FAX: 866-227-9245 – 215-893-1780 WWW. UTHORITY.COM For more information on DreamLine Shower Enclosures please visit www.BathAuthority.com Rev 2.1...
Need help?
Do you have a question about the HORIZON and is the answer not in the manual?
Questions and answers