Dealer Calibration; Seatrial Calibration Lock - Raymarine SmartPilot X-5 Sport Installation & Setup Manual

87076_1.book Page 52 Monday, March 10, 2008 9:21 AM
52
Screen Text
RESPONSE

4.4 Dealer calibration

For information on how to access Dealer calibration, refer to Accessing the
Calibration modes on page 48.
WARNING: Dealer calibration
Changing the Dealer calibration values can have a significant
affect on the SPX-5 Sport system steering characteristics and
therefore on the safety of your boat.
Some Dealer calibration values are adjusted during the commissioning process (see
Section Chapter 3: Commissioning & Setup), and once the SPX-5 Sport system has
been commissioned, you should not normally need to change Dealer calibration
values.
However if you decide you want to change values in Dealer calibration, be aware that
the Dealer calibration mode includes items that have a significant impact on SPX-5
Sport system operation and can affect your boat's safety.

Seatrial calibration lock

This screen controls the access to Seatrial calibration.
Screen text
CAL LOCK OFF
CAL LOCK ON
SmartPilot X-5 Sport installation & Setup Guide
Options
Range = 1 to 9
Levels 1 to 3 minimize the amount of pilot activity. This conserves
power, but may compromise short-term course-keeping accuracy.
Levels 4 to 6 should give good course keeping with crisp, well con-
trolled turns under normal operating conditions
Levels 7 to 9 give the tightest course keeping and greatest rudder
activity (and power consumption). This can lead to a rough passage
in open waters as the SPX-5 Sport system may 'fight' the sea.
Options
Calibration lock off – Seatrial calibration can be accessed (default)
Calibration lock on – Seatrial calibration cannot be accessed