Preface; Safety Notices; Emc Conformance; Pressure Washing - Raymarine SmartPilot X-5 Sport Installation & Setup Manual

Table of Contents

Advertisement

87076_1.book Page v Monday, March 10, 2008 9:21 AM

Preface

Preface
Contents

Safety notices

WARNING: Product installation & operation
This equipment must be installed, commissioned and operated
in accordance with the Raymarine instructions provided.
Failure to do so could result in personal injury, damage to your
boat and/or poor product performance.
WARNING: Switch off power supply
Make sure you have switched off the power supply before you
start installing this product.
WARNING: Navigational safety
Although we have designed this product to be accurate and
reliable, many factors can affect its performance. Therefore, it
should serve only as an aid to navigation and should never
replace commonsense and navigational judgement. Always
maintain a permanent watch so you can respond to situations
as they develop.

EMC Conformance

All Raymarine equipment and accessories are designed to the best industry
standards for use in the recreational marine environment. Their design and
manufacture conforms to the appropriate Electromagnetic Compatibility (EMC)
standards, but correct installation is required to ensure that performance is not
compromised.

Pressure washing

Subjecting any Raymarine product to high pressure washing may cause subsequent
water intrusion and failure of the product. Raymarine will not warranty product
subjected to high pressure washing.

Product documents

This document is part of a series of books associated with the SmartPilot X-5 series.
Documents can be downloaded from www.raymarine.com/handbooks.
Title
SmartPilot X-5 Sport Operating Guide
SmartPilot X-5 Wheel Installation and Setup Guide
ST6002 Controller Installation Sheet
v
Part number
81293
87076
87058

Advertisement

Table of Contents
loading

Table of Contents