Mitsubishi Electric PUZ-M200YKA Service Manual page 86

11-2. FUNCTION SELECTION OF REMOTE CONTROLLER
11-2-1. <PAR-4xMAA ("x" represents 0 or later)>
Function buttons
ON/OFF button
Press to turn ON/OFF the indoor unit.
SELECT button
Press to save the setting.
RETURN button
Press to return to the previous screen.
MENU button
Press to bring up the Main menu.
Backlit LCD
Operation settings will appear.
When the backlight is off, pressing any button turns the
backlight on and it will stay lit for a certain period of time
depending on the screen.
When the backlight is off, pressing any button turns
the backlight on and does not perform its function.
(except for the (ON/OFF) button)
OCH737
The functions of the function buttons change depending on the
screen.
Refer to the button function guide that appears at the bottom of
the LCD for the functions they serve on a given screen.
When the system is centrally controlled, the button function
guide that corresponds to the locked button will not appear.
Main display
Fri
28.5
Room
°C
Set temp.
Cool Auto
28.5
°C
Mode Temp. Fan
7 8 9 0
Menu screen
Operation
Vane·Louver·Vent. (Lossnay)
High power
Comfort
Main display:
Cursor
7 8 9 0
ON/OFF lamp
This lamp lights up in green while the unit is in operation.
It blinks while the remote controller is starting up or when
there is an error.
Function button F1
Main display : Press to change the operation mode.
Main menu : Press to move the cursor down.
Function button F2
Main display : Press to decrease temperature.
Main menu : Press to move the cursor up.
Function button F3
Main display : Press to increase temperature.
Main menu : Press to go to the previous page.
Function button F4
Main display : Press to change the fan speed.
Main menu : Press to go to the next page.
86
Main menu
Main Main menu
Energy saving
7 8 9 0
Function guide