Mitsubishi Electric PUZ-M200YKA Service Manual page 75

SW2 setting
The number of connected indoor units
ON
1 2 3 4 5 6
Capacity setting display
ON
1 2 3 4 5 6
Outdoor unit setting information
ON
1 2 3 4 5 6
Indoor pipe temperature/Liquid (TH2(1))
Indoor 1
ON
−39 to 88
1 2 3 4 5 6
Indoor pipe temperature/Cond./Eva.
(TH5(1))
ON
Indoor 1
−39 to 88
1 2 3 4 5 6
Indoor pipe temperature/Liquid (TH2(2))
Indoor 2
ON
−39 to 88
1 2 3 4 5 6
Indoor pipe temperature/Cond./Eva.
(TH5(2))
ON
Indoor 2
−39 to 88
1 2 3 4 5 6
Indoor room temperature (TH1)
8 to 39
ON
1 2 3 4 5 6
OCH737
Display detail
75
The black square ( ) indicates a switch position.
Explanation for display
0 to 4
(The number of connected indoor units are dis-
played.)
Displayed as an outdoor capacity code.
Capacity
M200
M250
• The tens digit (Total display for applied setting)
Setting details Display details
H·P / Cooling only 0: H·P
Single phase / 3 phase 0: Single phase 2: 3 phase
• The ones digit
Setting details Display details
Defrosting switch 0: Normal
(Example) When heat pump, 3 phase and defrosting
(normal) are set up, "20" is displayed.
−39 to 88
(When the temperature is 0°C or less, "–" and
temperature are displayed by turns.)
−39 to 88
(When the temperature is 0°C or less, "–" and
temperature are displayed by turns.)
−39 to 88
(When the temperature is 0°C or less, "–" and
temperature are displayed by turns.)
−39 to 88
(When the temperature is 0°C or less, "–" and
temperature are displayed by turns.)
8 to 39
Unit
Unit
Code
Code
40
display
50
1: Cooling only
Code
display
1: For high humidity
°C
°C
°C
°C
°C