Mitsubishi Electric PUZ-M200YKA Service Manual page 108

OPERATING PROCEDURE
10. Removing the compressor (MC)
(1) Remove the electrical parts box. (See Photo 4)
(2) Remove the cover panel (front). (See Photo 1)
(3) Remove the cover panel (rear). (See Photo 1)
(4) Remove the valve bed. (See photo 14)
(5) Remove the side panel (R). (See Photo 1)
(6) Remove the front panel fixing screws (5 for front/ 5x12
and 2 for front/ 4x10), then slide the front panel upward
to remove it.
(The front panel is fixed with 4 hooks; 3 on the left side
fixing to the side panel (L), and the other on the right side
fixing to the separator.)
(7) Release the lead wire for FM1 and FM2 from the hole on
separator.
(8) Remove the separator fixing screws (4 for front/ 4x10),
then slide the separator upward to remove it. (The sepa-
rator is fixed to a hook of the side plate.)
(9) Recover refrigerant.
(10) Remove the welded part of compressor (2 positions).
(11) Remove the 3 compressor fixing nuts (M6) to remove the
compressor.
Note 1: Recover refrigerant without spreading it in the air.
Note 2: The compressor can be easily removed by remov-
ing separator.
11. Removing the power receiver
(1) Remove the electrical parts box. (See photo 4)
(2) Remove the cover panel (front). (See Photo 1)
(3) Remove the cover panel (rear). (See Photo 1)
(4) Remove the ball valve fixing screws (2 for front/ 5x16).
(See Photo14)
(5) Remove the stop valve fixing screws (2 for front/ 5x16).
(See Photo14)
(6) Remove the valve bed. (See Photo 14)
(7) Remove the side panel (R). (See Photo 1)
(8) Recover refrigerant.
(9) Remove the welded part of the power receiver (4 posi-
tions) to remove the receiver.
(10) Remove receiver leg fixing screws (2 for front/ 4 x 10),
then slide the power receiver forward to remove it.
(The power receiver is fixed to the base with a hook on
the bottom.)
Note: Recover refrigerant without spreading it in the air.
OCH737
PHOTOS/FIGURES
Photo 14
Stop valve
fixing screws
Valve bed
Valve bed
fixing screw
Separator
Separator
fixing screw
Photo 15
Compressor
(MC)
Receiver leg
fixing screws
108
Ball valve fixing
screws
Valve
bed fixing
screws
Ball valve
Stop valve
Power
receiver
Compressor
(MC)
Compressor
fixing nut
Inlet
Outlet
Power receiver
Receiver leg