Installation Wizard - D-Link DCS-6220G User Manual

DCS-660G User's Manual

Installation Wizard

Installation Wizard
After you have successfully completed the hardware installation of the DCS-6620G 80.11g PTZ Internet
Camera, it is necessary to install software to configure and operate the camera. The first step is to install
the Installation Wizard program from the CD. Installation Wizard will allow you to configure the 80.11g
PTZ Internet Camera to your network.
After the Installation Wizard software program is completed, you will have an operating and controllable
80.11g PTZ Internet Camera. From your Internet Explorer Web browser you will be able to access the
video and sound from the 80.11g PTZ Internet Camera. The camera has a built-in Web server. This Web
server will allow the camera to access the Internet without being attached to a computer and permits
users to view the video and audio remotely.
However, it is necessary to install the IP surveillance software from the enclosed CD to create a truly
powerful surveillance system. The following section will show in detail the launching of the Installation
Wizard and installation of the IP surveillance software.
Launching the Installation Wizard program
Insert the CD that is included with the DCS-6620G 80.11g PTZ Internet Camera into your computer's
CD-ROM. The DCS-6620G installation menu will start up automatically from the CD. If the CD does not
start up automatically, (this function may be disabled in the Windows operating system), access the CD
from Windows My Computer and click on DCS6620G.exe to access the installation menu shown below:
Click Installation Wizard
D-Link Systems, Inc. 10