Motherboard Installation; Tools Needed; Location Of Mounting Holes - Supermicro X11DPG-QT User Manual

Super X11DPG-QT User's Manual

2.2 Motherboard Installation

All motherboards have standard mounting holes to fit different types of chassis. Make sure
that the locations of all the mounting holes for both the motherboard and the chassis match.
Although a chassis may have both plastic and metal mounting fasteners, metal ones are
highly recommended because they ground the motherboard to the chassis. Make sure that
the metal standoffs click in or are screwed in tightly.

Tools Needed

MAC CODE IPMI CODE
SAN MAC BAR CODE
DESIGNED IN USA
BIOS
LICENSE
PCH

Location of Mounting Holes

Notes: 1. To avoid damaging the motherboard and its components, please do not use
a force greater than 8 lb/inch on each mounting screw during motherboard installation.
2. Some components are very close to the mounting holes. Please take precautionary
measures to avoid damaging these components when installing the motherboard to
the chassis.
Philips
Screwdriver
(1)
BMC
LAN
CTRL
24
Philips Screws
(14)
CPU2
CPU1
Standoffs (14)
Only if Needed