Supermicro X11DPG-QT User Manual page 14

Super X11DPG-QT User's Manual
Connector Description
JSD1, JSD2 SATA DOM Power Connectors 1/2
JSEN1 Inlet Sensor Header
JSPDIF_IN1 Sony/Philips Digital Interface Audio Input Header
JSTBY1 Standby Power Connector
JTBT1 General Purpose Header for Thunderbolt Add-on Card
JTPM1 Trusted Platform Module/Port 80 Connector
JUIDB1 UID (Unit Identifier) Switch
LAN1, LAN2 LAN Ports
PCIe M.2 Connector, small form factor devices and other portable devices for high speed NVMe
M.2 CONNECTOR
SSDs
S-SATA4, S-SATA5 SATA 3.0 Ports with Power-pin Built-in w/ support of SuperDOM (Device-On Module)
S-SGPIO Serial Link General Purpose I/O Header
SP1 Internal Speaker/Buzzer
USB0, USB1 Back Panel USB 2.0 Ports
USB2, USB3 Front Access USB 2.0 Header
USB4, USB5 Back Panel USB 3.0 Ports
USB6, USB7 Front Access USB 3.0 Header
USB8 USB 3.0 Type A Header
VGA VGA Port (Back Panel)
LED Description
LED2 UID (Unit Identifier) LED
LEDM1 BMC Heartbeat LED
LEDPWR Onboard Power LED
Note: To avoid causing interference with other components, please be sure to use an
add-on card that is fully compliant with the PCIe standard on a PCIe slot.
Status
Solid Blue: Unit Identified
Blinking Green: BMC Normal
Solid Green: Power On
14