Supermicro X11DPG-QT User Manual page 133

Latched Last shutdown status PM S5 Received, PMIC 12V/DDRT 1.2V Power
Loss (PLI), Controller's FW State Flush Complete, Write Data Flush Complete,
PM Idle Received
(Note: All DCPMM items and strings displayed on the BIOS screen are provided by
Intel and will depend on the driver version.)
Unlatched last shutdown status Unknown
Security capabilities
Modes supported
Boot status
AIT DRAM enabled
Error injection enabled
Media temperature injection enabled [0]
Software triggers enabled [0]
Software triggers enabled details None
Poison error injection counter 0
Poison error clear counter 0
Media temperature injection counter 0
Software triggers counter 0
Master Passphrase Enabled 0
DIMM ID 0x1101
Press <Enter> and the following information regarding this DIMM will be displayed.
View settings or select an action below.
DIMM UID
DIMM handle
DIMM physical ID
Manageability state
Health state
Health state reason
Encryption, Erase
Memory Mode, App Direct
Success
[1]
[0]
8089-A2-1837-00001038
0x1101
0x0031
[Manageable]
[Healthy]
None
133
Chapter 4: UEFI BIOS