Supermicro X11DPG-QT User Manual page 156

Super X11DPG-QT User's Manual
State: Ok
Message:
The security check succeeded.
TestName: FW
State: Ok
Message:
The firmware consistency and settings check succeeded.
Back to main menu
Preferences
Use this submenu to display and/or modify user preferences.
View and/or modify user preferences.
Default DIMM ID:
Use this feature to view and/or modify the default display of DIMM identifiers. The options
are Handle and UID.
Capacity units:
This feature is to view and/or modify the default units for displaying capacities. Use auto
(x1024) or Auto_10 (x1000) to automatically select the best format. The options are Auto,
Auto_10, B, MB, MiB, GB, GiB, TB, and TiB .
App Direct settings:
This feature is to view and/or modify the interleaving settings for creating App Direct
capacity. The default setting is 4KB_4KB (Recommended).
App Direct granularity:
This feature is to view and/or modify the minimum App Direct granularity per DIMM. The
options are Recommended and 1.
Back to main menu
Driver Health
This submenu displays the health status of the drivers and controllers as detected by the
system. The following information is displayed.
156