Tait TM9300 User Manual page 43

Selecting a zone
1 Select Menu > Set zone.
Main menu
Set zone
Set workgroup
(Depending on how your radio is programmed, you
may be able to use the scroll keys or left selection
key to select a zone.)
2 In the Set Zone menu, scroll through the list of
zones until the zone you want appears.
3 Press Select.
4 Check that orange LED is glowing and the network
icon
Selecting a workgroup
1 Select Menu > Set workgroup.
Main menu
Set workgroup
Go to homegroup
(Depending on how your radio is programmed, you
may be able to use the scroll keys or left selection
key to select a workgroup.)
2 In the Set Workgroup menu, scroll through the list
of workgroups until the workgroup you want
appears.
3 Press Select.
4 Check that orange LED is glowing and the network
icon
Your radio may be programmed to use different
names for a 'zone' and 'workgroup'. For
example, 'district' or 'area' may be used in place
of zone, and 'role' or 'group' may be used in
place of workgroup.
Back Select
appears in the display.
Back Select
appears in the display.
Operating in trunked mode 43