Receiving A Call; Receiving A Text Message - Tait TM9300 User Manual

Receiving a call

Receiving a text message

80 Operating in conventional mode
When there is valid activity on your radio's currently
selected channel or group, the radio then unmutes
and you can hear the call.
If the incoming call contains special signaling that
matches the signaling programmed for your radio, the
green LED flashes and your radio may give a ringing
tone.
Your radio may be able to display received text
messages in conventional mode. If programmed, the
queuing icon
queue) is always shown in the default display while in
conventional mode.
Viewing a text message
When a text message is received, the radio sounds
two short high-pitched beeps. If the radio is currently
showing the default display, the message appears
immediately.
To view a message that does not appear immediately:
1 Navigate to the default display.
2 Press Queue.
To delete the message, press Delete. The
message Queue empty appears in the display.
If you want to leave the message in the queue,
press Back.
The conventional call queue only retains one
message. If a new message is received while
there is an old message left in the queue, the
old message will be replaced.
(empty queue) or (message in