Table of Contents
Advertisement
HOW TO USE A FITNESS TEST WORKOUT
The fitness test workouts measure your relative fitness
level. For the most accurate results, use a fitness test
workout when you are not feeling tired, when you have
not eaten for at least two hours, and when you have
not exercised for at least 24 hours.
The treadmill features three fitness workouts. The
Ebbeling Fitness Test measures VO
capacity, and lasts 9 minutes. The Gerkin Fitness Test
also measures VO
max. The Gerkin Fitness Test be-
2
gins with a three-minute warm-up period and ends
after either 14 minutes or when you reach a certain
heart rate. The FreeMotion Fitness Test measures
your fitness level on a scale of 1 to 10. The FreeMotion
Fitness Test ends after either 28 minutes or when you
reach a certain heart rate.
1. Put on the chest pulse sensor.
To use a fitness test, you must wear the chest
pulse sensor or use the handgrip pulse sensor.
Note: For best results, you should wear the chest
pulse sensor.
2. Insert the key into the console.
See step 1 on page 15.
3. Select a fitness test workout.
To select a fitness test workout, press the Fitness
Test button repeatedly until the name of the de-
sired fitness test appears in the display.
Press the Enter button to select the desired work-
out. Select your age and then your weight using
the Increase and Decrease buttons next to the
Enter button. Press the Enter button after each
selection. Note: To use the Ebbeling Fitness Test,
you must also enter your gender.
4. Start the walking belt.
Press the Start/Stop button to start the workout. A
moment after you press the button, the treadmill will
max, or aerobic
2
5. Select a display mode and monitor your
6. Turn on the fan if desired.
7. When you are finished exercising, remove the
20
automatically adjust to the first speed and incline
settings of the fitness test. Begin walking on the
treadmill. Note: For the most accurate results, do
not hold the handrails during a fitness test workout.
During the workout, the speed and incline of the
treadmill will periodically change. The speed set-
ting or the incline setting will appear in the display
to alert you before each change. IMPORTANT:
The Speed and Incline buttons will not function
during a fitness test workout.
Note: If you press the Start/Stop button during the
fitness test, the fitness test will end.
When the workout ends, the walking belt will slow
to a stop and your fitness level or VO
pear in the display.
If your pulse is not detected during the workout, the
words CHECK HEART RATE MONITOR will ap-
pear in the display and the speed of the treadmill
may automatically decrease. If your pulse is still
not detected, the fitness test will be aborted.
progress with the display.
See step 4 on page 18. Note: The fitness tests will
display your fitness level instead of your exercise
intensity in METs. The console may display a "W"
when you are warming up or a "C" when you are
cooling down.
See step 7 on page 17.
key from the console.
See step 8 on page 17.
max will ap-
2
Advertisement
Table of Contents
