Do you have a question about the NTL16915C.0 and is the answer not in the manual?
Questions and answers
Dave Pisetsky
January 28, 2025
Hello, I **** looking to replace a walking belt for nordic track C700 2.75 Model# ntl16915.0. would you have any information on how i could purchase.
1 comments:
Mr. Anderson
February 10, 2025
You can purchase a replacement walking belt for the NordicTrack C700 Model # NTL16915C.0 from various sources. The belt has Part Number 263241 and is available on treadmill parts websites. To ensure you get the correct belt, verify that the listing details match your treadmill's information. Some sellers offer a free 1oz lubricant with the purchase. Shipping typically takes 3-5 business days.
Page 1
Model No. NTL16915C.0 USER'S MANUAL Serial No. Write the serial number in the space above for reference. Serial Number Decal ACTIVATE YOUR WARRANTY To register your product and activate your warranty today, go to iconservice.ca. CUSTOMER SERVICE Call toll-free 1-888-936-4266 Mon.–Fri.
305284 NORDICTRACK and IFIT are registered trademarks of ICON Health & Fitness, Inc. App store is a trademark of Apple Inc., registered in the U.S. and other countries. Android and Google Play are trademarks of Google Inc. The BLUETOOTH word mark and logos are registered trademarks of Bluetooth SIG, Inc.
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read all important precautions and instructions in this manual and all warnings on your treadmill before using your treadmill. ICON assumes no responsibility for personal injury or property damage sus- tained by or through the use of this product.
Page 4
19. Always stand on the foot rails when starting able to safely lift 45 lbs. (20 kg) to move the or stopping the walking belt. Always hold the treadmill. handrails while using the treadmill. 26. When folding or moving the treadmill, make 20.
BEFORE YOU BEGIN Thank you for selecting the new NORDICTRACK manual. To help us assist you, note the product model ® C 700 treadmill. The C 700 treadmill provides an number and serial number before contacting us. The impressive selection of features designed to make your model number and the location of the serial number workouts at home more effective and enjoyable.
PART IDENTIFICATION CHART Use the drawings below to identify small parts used for assembly. The number in parentheses below each draw- ing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity used for assembly.
ASSEMBLY • Assembly requires two persons. • To identify small parts, see page 7. • Place all parts in a cleared area and remove the • Assembly requires the following tools: packing materials. Do not dispose of the packing the included hex keys materials until you finish all assembly steps.
Page 9
2. Make sure that the power cord is unplugged. Remove the tie securing the Upright Wire (81) to the front of the Base (94). Next, identify the Right Upright (90). Have a sec- ond person hold the Right Upright near the Base (94).
Page 10
4. Hold the Right Upright (90) against the Base (94). Make sure not to pinch the Upright Wire (81). Attach the Right Upright (90) with two 3/8" x 2 1/4" Screws (7), a 3/8" x 1 1/4" Screw (63), a 3/8" x 1 3/4" Screw (62), and four 3/8" Star Washers (13) as shown;...
Page 11
6. Identify the left handrail assembly (E). Attach the left handrail assembly to the Left Upright (89) with two 5/16" x 2 1/2" Screws (28) and two 5/16" Star Washers (11); do not fully tighten the Screws yet. Then, remove and discard the indicated screw (F).
Page 12
8. Tighten four #8 x 3/4" Screws (2) into the left and right handrail assemblies (E, G) and into the Left and Right Uprights (89, 90). 9. Set the Console Base (64) face down on a soft surface to avoid scratching the Console Base. If there are ties (H) securing the Pulse Crossbar (93) to the Console Base, remove the ties.
Page 13
10. Identify the Right and Left Trays (27, 36). Attach the Trays (27, 36) to the Console Base (64) with eight #8 x 1/2" Screws (1); do not overtighten the Screws. Reattach the Console Frame (18) with the four #8 x 3/4" Screws (2), the two #8 x 1" Screws (31), and the two Console Clamps (92) that you removed in step 9;...
Page 14
12. With the help of a second person, hold the con- sole assembly (J) near the Handrails (86) (only one side is shown). Connect the ground wire (K) from the console assembly (J) to the Console Ground Wire (58) on the Pulse Crossbar (93). See the inset drawing.
Page 15
14. Attach the Pulse Crossbar (93) to the console assembly (J) with four #8 x 1/2" Screws (1); start all four Screws, and then tighten them. Then, firmly tighten the four 5/16" x 3/4" Screws (4). 15. Raise the Frame (56) to the upright position. Have a second person hold the Frame until step 17 is completed.
Page 16
16. Remove the 5/16" Nut (34) and the 5/16" x 1 3/4" Bolt (6) from the bracket on the Base (94). Next, orient the Storage Latch (53) as shown. Attach the lower end of the Storage Latch (53) to the bracket on the Base (94) with the 5/16" x 1 3/4"...
Page 17
18. Firmly tighten the four 3/8" x 2 1/4" Screws (7), the two 3/8" x 1 3/4" Screws (62), and the two 3/8" x 1 1/4" Screws (63). Next, set the Left Inner Base Cover (99) onto the lower end of the Left Upright (89). Slide the Left Base Cover (82) downward and press it onto the Left Inner Base Cover.
HOW TO USE THE TREADMILL HOW TO CONNECT THE POWER CORD more amps. To avoid overloading the circuit, do not plug other electrical devices, except for low- Use a Surge Suppressor power devices such as cell phone chargers, into the surge suppressor or into an outlet on the same Your treadmill, like other electronic equipment, can be circuit.
Page 19
CONSOLE DIAGRAM FEATURES OF THE CONSOLE To turn on the power, see page 20. To use the man- ual mode, see page 20. To use an onboard workout, see page 22. To use a custom-focus weight loss The treadmill console offers a selection of features workout, see page 23.
Page 20
HOW TO TURN ON THE POWER HOW TO USE THE MANUAL MODE IMPORTANT: If the treadmill has been exposed to 1. Insert the key into the console. cold temperatures, allow it to warm to room tem- perature before you turn on the power. If you do See HOW TO TURN ON THE POWER at the left.
Page 21
5. Change the incline of the treadmill as desired. To reset the display, press the Stop button repeat- edly, or remove the key and then reinsert the key. To change the incline of the treadmill, press the 7. Measure your heart rate if desired. Incline increase and decrease buttons or one of the Quick Incline buttons.
Page 22
8. Turn on the fan if desired. HOW TO USE AN ONBOARD WORKOUT The fan features multiple speed settings and an 1. Insert the key into the console. auto mode. When the auto mode is selected, the speed of the fan will automatically increase See HOW TO TURN ON THE POWER on page 20.
Page 23
5. Follow your progress with the display. HOW TO USE A CUSTOM-FOCUS WEIGHT LOSS WORKOUT See step 6 on page 21. If you select an onboard 1. Insert the key into the console. workout, the display will show the time remaining instead of the elapsed time.
Page 24
HOW TO CONNECT YOUR TABLET TO THE 5. Disconnect your tablet from the console if CONSOLE desired. The console supports BLUETOOTH connections to To disconnect your tablet from the console, first tablets via the iFit Bluetooth Tablet app and to compat- select the disconnect option in the iFit Bluetooth ible heart rate monitors.
Page 25
HOW TO USE THE SOUND SYSTEM HOW TO ADJUST THE CUSHIONING SYSTEM To play music or audio books through the console The treadmill features a cushioning system that sound system while you exercise, plug a 3.5 mm male reduces the impact as you walk or run on the treadmill. to 3.5 mm male audio cable (not included) into the jack on the console and into a jack on your personal Remove the key from the console and unplug the...
HOW TO USE THE TABLET HOLDER IMPORTANT: The tablet holder is designed for use Tablet with most full-size tablets. Do not place any other Holder electronic device or object in the tablet holder. To insert a tablet into the tablet holder, set the bottom edge of the tablet in the tray.
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL HOW TO MOVE THE TREADMILL To avoid damaging the treadmill, adjust the incline Before moving the treadmill, fold it as described at the to zero before you fold the treadmill. Then, remove left.
MAINTENANCE AND TROUBLESHOOTING MAINTENANCE b. After the power cord has been plugged in, make sure that the key is inserted into the console. Regular maintenance is important for optimal per- formance and to reduce wear. Inspect and properly c. Check the power switch located on the treadmill tighten all parts each time the treadmill is used.
Page 29
SYMPTOM: The incline of the treadmill does not c. Your treadmill features a walking belt coated with change correctly high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking platform unless a. Hold down the Stop button and the Speed increase instructed to do so by an authorized service button, insert the key into the console, and then release the Stop button and the Speed increase...
Page 30
b. If the walking belt slips when walked on, first SYMPTOM: The tablet holder does not stay in place remove the key and UNPLUG THE POWER CORD. Using the hex key, turn both idler roller a. Rotate the tablet holder backwards. Then, tighten screws clockwise, 1/4 of a turn.
EXERCISE GUIDELINES Burning Fat—To burn fat effectively, you must exer- WARNING: cise at a low intensity level for a sustained period of Before beginning this time. During the first few minutes of exercise, your or any exercise program, consult your physi- body uses carbohydrate calories for energy.
Page 32
SUGGESTED STRETCHES The correct form for several basic stretches is shown at the right. Move slowly as you stretch —never bounce. 1. Toe Touch Stretch Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible.
PART LIST Model No. NTL16915C.0 R0517A Key No. Qty. Description Key No. Qty. Description #8 x 1/2" Screw Wire Tie #8 x 3/4" Screw Drive Roller/Pulley 5/16" x 2 1/4" Bolt 1/4" x 1 1/4" Screw 5/16" x 3/4" Screw 9/32"...
Page 35
Key No. Qty. Description Key No. Qty. Description Right Inside Handrail Cover Left Inner Base Cover Right Outside Handrail Cover Right Inner Base Cover Base Pad 3/8" Washer – User’s Manual Tablet Holder Note: Specifications are subject to change without notice. For information about ordering replacement parts, see the back cover of this manual.
ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to provide the following information when contacting us: • the model number and serial number of the product (see the front cover of this manual) •...
Need help?
Do you have a question about the NTL16915C.0 and is the answer not in the manual?
Questions and answers
Hello, I **** looking to replace a walking belt for nordic track C700 2.75 Model# ntl16915.0. would you have any information on how i could purchase.
You can purchase a replacement walking belt for the NordicTrack C700 Model # NTL16915C.0 from various sources. The belt has Part Number 263241 and is available on treadmill parts websites. To ensure you get the correct belt, verify that the listing details match your treadmill's information. Some sellers offer a free 1oz lubricant with the purchase. Shipping typically takes 3-5 business days.
This answer is automatically generated