Table of Contents
Advertisement
HOW TO MOVE THE TREADMILL
Due to the size and weight of the treadmill, moving it requires two or three persons.
Before moving the treadmill, plug in the power cord and insert the key into the console (see step 1 on page 15).
Raise the incline to the highest position. Then, remove the key and unplug the power cord.
Hold the handle firmly in the location shown at the
right. CAUTION: To decrease the possibility of dam-
age to the treadmill or of injury, do not lift the tread-
mill by the handrail. Carefully roll the treadmill on the
wheels to the desired location and then lower it to the
level position. CAUTION: To reduce the risk of injury,
use extreme caution while moving the treadmill. Do
not attempt to move the treadmill over uneven sur-
faces.
Handle
Wheels
After the treadmill is placed in the location where it will
be used, make sure that the leveling feet rest firmly on
the floor. If the treadmill rocks even slightly, loosen one
of the nuts, turn the leveling foot clockwise or counter-
clockwise until the rocking motion is eliminated, and
retighten the nut.
Nuts
Leveling Feet
25
Advertisement
Table of Contents
