NordicTrack CLUB REFLEX User Manual page 10

7. Make sure that the teeth on the Fan Grill
(102) are on the outside of the Upright Cover
(80) and sit inside the grooves on the Upright
Cover.
Tighten two #6 x 5/8" Machine Screws (128) into
the Upright Cover (80) in the locations shown.
Be careful not to overtighten the Machine
Screws.
8. Tighten the two 3/8" x 3 1/4" Patch Bolts (1).
7
128
102
8
10
128
Teeth
80
1