Installing The Internal Dual Sd Module; Network Daughter Card - Dell DL4300 Owner's Manual

Convention
E
Next steps
Follow the procedure listed in the After working inside your system section.
Related Links
Safety instructions
Before working inside your system
After working inside your system

Installing the internal dual SD module

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
1. Follow the safety guidelines listed in Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
Steps
1. Locate the IDSDM connector on the system board. To locate the IDSDM connector, see the System
board jumpers and connectors section.
2. Align the connectors on the system board and the dual SD module.
3. Push the dual SD module until it is firmly seated on the system board.
Next steps
1. Install the SD card into slot 1.
NOTE: Temporarily label each SD card with its corresponding slot before removal. Replace the
SD card into the same slot.
2. Follow the procedure listed in the After working inside your system section.
Related Links
Removing a hot swappable hard drive
Safety instructions
Before working inside your system
After working inside your system

Network daughter card

The Network daughter card (NDC) is a small, removable mezzanine card. The NDC provides you with the
flexibility of choosing different network connectivity options, for example—4 x 1GbE, 2 x 10GbE and 2 x
Converged Network Adapter.
IDSDM indicator code
Not lit
Description
Indicates that the card is missing or is booting
125